Send Email
Send SMS
Avtar Steel Limited
Avtar Steel Limited

Home »


Production Process

We follow a carefully planned detailed and advanced production process. During this extreme stress is given on perfection at all the steps to ensure premium quality of the products.

The various activities involved in the production process are as follows:
  • SS scrap of predetermined composition is melted in induction furnace and liquid hot metal is transferred in pouring ladle.
  • The liquid metal is transferred into caste iron moulds from the pouring ladle.
  • The central trumpet which receives the liquid metal is lined with bricks inside
  • Ingot moulds are cleaned from rust and dust from the inner surface with compressed air and are given suitable coating inside for easy removal of ingots from moulds after the hot metal is solidified the moulds are removed by crane
  • The ingots are then knocked out and transferred to a cooling area.
  • If any surface defect is observed, it is removed by grinding and chipping
  • Ingots are batch marked of grade/heat number and stocked for dispatch


Contact via E-mail
Contact via SMS
Avtar Steel Limited
Pankaj Gupta (Operations Director)
15th Floor, Aggarwal Corporate Heights , Pitampura,
New Delhi - 110034, Delhi, India
Call Us: 
Call Response Rate: 76%
Share Us :

Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us

© Avtar Steel Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Avtar Steel Limited